FAQ: How To Cut 18 Inch Ceramic Tile?

Do you cut ceramic tile face up or down?

Regardless of the kind of tile you’re cutting, the best method is to cut with the front of the tile facing up. The front is the side that will be exposed once you lay the tile. This method ensures the smoothest finished edge on the tile with the least amount of chipping.

How small can you cut ceramic tile?

A tile cutter can safely cut tiles as small as 6-by-6 inches in a straight line.

Can you cut ceramic tile with a jigsaw?

The jigsaw is an ideal tool for cutting a variety of substances, including ceramic tile. Small and light weight, the jigsaw is easily handled regardless of your skill or strength.

How can I cut tile without tools?

For any type of tile (like ceramic, glass, or porcelain), an angle grinder is best for round cuts whereas a glass cutter can make smaller cuts. And if you have a lot of tile to trim, a wet saw is one of the easiest, quickest options.

Why is my ceramic tile chipping when cutting?

If a tile chips, it is generally not a manufacturing fault but is the cause of one of the following accidents against the tile itself: Dropping a heavy or hard object onto the ceramic or porcelain tile. This may cause the surface to crack or chip.

Why does my tile break when I cut it?

Because of the compressed, fragile nature of tile, it can crack, break and fragment when you try to cut it. The best way to keep tile from cracking is to use a score-and-snap tile cutter or a diamond wet saw.

Is it hard to cut ceramic tile?

Common 1/4-inch tile found in most tile stores that’s used for bathroom walls and kitchen back splashes is not nearly as hard as porcelain. These can be nipped by hand or cut easily with a traditional snap tile cutter. It won’t take long for you to see how easy it is to use a traditional snap cutter and tile nippers.

Why wont my tile cutters cut straight?

Try double scoring the end that is not braking correctly. you could just be missing some pressure on the scoring action. Try slowly breaking the tile with smaller push down actions with the breaker on the tile and slowly move up the tile doing the same instead of one swift snapping action.

What kind of blade do you use to cut ceramic tile?

The Blade. The best type of blade to use with an angle grinder when cutting ceramic tile is a diamond-tipped, smooth-edge blade without any notches or serration. Notched blades are for porcelain and serrated blades are more suited to natural stones.

How do you cut already installed ceramic tile?

While loose tiles are cut using a tile wet saw, installed tiles need to be cut with hand tools. To make square or box cuts in the tile, or to cut out large sections of tile, use an angle grinder. To make circular cuts to accommodate pipes, use a hole saw.